Skip to content



Our products are equipped with at least one USB port and many of them also have a USB OTG port where it is possible to connect e.g. keyboards, memory sticks or a PC (to enable "Ethernet over USB").

Platform specific⚓︎

Ethernet over USB⚓︎

Ethernet over USB is supported via RNDIS. Connect a USB-A cable to the USB0 port on the supported platforms and a free USB port on e.g. a PC, then power on the unit or reboot. (The MX-4 has the capacity to switch from host to peripheral state when powered.) This will give the PC the IP address and the product