Skip to content

Ethernet (HMX)

Overview⚓︎

This product has four Ethernet: - eth0 : MX34 connector that supports 10BASE-T and 100BASE-TX - eth1 : 8P8C(RJ45) connector that supports 10BASE-T and 100BASE-TX - eth2 : Rosenberger connector that supports 100 and 1000BASE-T1 - eth3 : Rosenberger connector that supports 100 and 1000BASE-T1

Default IP addresses and interface names⚓︎

The eth0, eth1, eth2 and eth3 Ethernet interfaces are configured to request their IP addresses using DHCP with a fallback to static addresses 192.168.1.200 for eth0, 192.168.2.200 for eth1, 192.168.3.200 for eth2, and 192.168.4.200 for eth3.

Sleep and wake up⚓︎

Not supported by the current hardware revision. T1 Ethernet (eth2 and eth3) wake from suspend/sleep is planned for a later revision.